Are you having trouble figuring out how to charge your JLab Go Air earbuds? Look no further. In this article, we’ll take you through a step-by-step guide on how to charge your earbuds, as well as provide some valuable tips and tricks to help you get the most out of your listening experience.
Understanding the Charging Process
Before we dive into the nitty-gritty of charging your JLab Go Air earbuds, it’s essential to understand the basics of the charging process. The JLab Go Air earbuds come with a rechargeable battery that can be charged using a USB-C cable. The charging process is relatively straightforward, but there are a few things to keep in mind to ensure that your earbuds are charged correctly.
Charging the Earbuds
To charge your JLab Go Air earbuds, follow these steps:
- Locate the USB-C charging port on the charging case. It’s usually located on the bottom or side of the case.
- Take the USB-C cable provided with your earbuds and plug one end into the charging port on the case.
- Plug the other end of the cable into a USB power source, such as a wall adapter or a computer.
- The earbuds will begin charging automatically. You’ll know they’re charging when the LED light on the case starts flashing.
Charging Times
The charging time for your JLab Go Air earbuds will depend on the level of charge they have when you start charging them. Here are some approximate charging times to give you an idea of what to expect:
- 15-30 minutes: This will give you around 1-2 hours of playback time.
- 1-2 hours: This will give you around 4-6 hours of playback time.
- 2-3 hours: This will give you a full charge, which is around 8-10 hours of playback time.
Tips and Tricks for Charging Your JLab Go Air Earbuds
Now that you know the basics of charging your JLab Go Air earbuds, here are some tips and tricks to help you get the most out of your listening experience:
Use the Right Charging Cable
It’s essential to use the right charging cable to charge your JLab Go Air earbuds. The earbuds come with a USB-C cable, which is the recommended cable to use. Using a different type of cable may damage the earbuds or affect their performance.
Avoid Overcharging
Overcharging your JLab Go Air earbuds can reduce their battery life. Try to avoid charging them for extended periods, and unplug them as soon as they’re fully charged.
Keep the Charging Case Clean
The charging case can accumulate dirt and dust over time, which can affect the earbuds’ performance. Make sure to clean the case regularly using a soft cloth and avoid getting it wet.
Update Your Earbuds’ Firmware
JLab regularly releases firmware updates for their earbuds, which can improve their performance and fix any issues. Make sure to check the JLab website for any updates and follow the instructions to update your earbuds’ firmware.
Troubleshooting Common Charging Issues
If you’re experiencing any issues with charging your JLab Go Air earbuds, here are some troubleshooting tips to help you resolve the problem:
Earbuds Not Charging
If your earbuds are not charging, try the following:
- Check the charging cable and make sure it’s properly connected to both the earbuds and the power source.
- Try using a different power source or charging cable.
- Restart the earbuds by placing them in the charging case and closing the lid.
Earbuds Not Turning On
If your earbuds are not turning on, try the following:
- Check the charging level and make sure they’re fully charged.
- Try restarting the earbuds by placing them in the charging case and closing the lid.
- Reset the earbuds by pressing and holding the button on the charging case for 10 seconds.
Conclusion
Charging your JLab Go Air earbuds is a relatively straightforward process, but there are a few things to keep in mind to ensure that they’re charged correctly. By following the tips and tricks outlined in this article, you can get the most out of your listening experience and enjoy your music without any interruptions. Remember to always use the right charging cable, avoid overcharging, and keep the charging case clean to ensure optimal performance.
| Charging Time | Playback Time |
|---|---|
| 15-30 minutes | 1-2 hours |
| 1-2 hours | 4-6 hours |
| 2-3 hours | 8-10 hours |
By following these guidelines and tips, you’ll be able to charge your JLab Go Air earbuds with ease and enjoy your music without any hassle.
How do I charge my JLab Go Air Earbuds?
To charge your JLab Go Air Earbuds, start by placing them in their charging case. Make sure the earbuds are properly aligned with the charging contacts in the case. Then, plug the USB-C charging cable into the charging case and connect the other end to a USB power source, such as a wall adapter or computer. The charging case will begin to charge the earbuds.
It’s essential to note that the charging case itself also needs to be charged. If the charging case is out of battery, it won’t be able to charge the earbuds. To check the battery level of the charging case, look for the LED light on the front of the case. A red light indicates low battery, while a blue light indicates a full charge.
How long does it take to fully charge my JLab Go Air Earbuds?
The charging time for JLab Go Air Earbuds varies depending on the battery level and the power source. On average, it takes around 1.5 hours to fully charge the earbuds from 0% to 100%. However, if you’re using a fast charger, you can get up to 3 hours of playtime with just a 10-minute charge.
It’s also worth noting that the charging case can charge the earbuds multiple times before needing to be recharged itself. The charging case has a battery capacity of around 500mAh, which can provide up to 24 hours of playtime for the earbuds.
Can I charge my JLab Go Air Earbuds wirelessly?
Unfortunately, the JLab Go Air Earbuds do not support wireless charging. They can only be charged using the USB-C charging cable provided with the earbuds. However, some third-party charging cases may offer wireless charging capabilities, but these are not officially supported by JLab.
If you’re looking for a convenient charging solution, you can consider using a portable power bank with a USB-C output. This way, you can charge your earbuds on-the-go without needing to find a wall outlet.
How do I know if my JLab Go Air Earbuds are fully charged?
To check if your JLab Go Air Earbuds are fully charged, look for the LED light on the charging case. A blue light indicates that the earbuds are fully charged, while a red light indicates low battery. You can also check the battery level of the earbuds on your device, such as a smartphone or tablet.
It’s also worth noting that the earbuds will automatically turn off when they’re fully charged. This is a power-saving feature designed to prolong the battery life of the earbuds.
Can I charge my JLab Go Air Earbuds and use them at the same time?
Yes, you can charge your JLab Go Air Earbuds and use them at the same time. This is known as “pass-through charging.” Simply plug the USB-C charging cable into the charging case and connect the other end to a USB power source. Then, take the earbuds out of the case and start using them.
Keep in mind that pass-through charging may affect the sound quality of the earbuds. This is because the charging process can introduce electrical noise that may interfere with the audio signal.
How often should I charge my JLab Go Air Earbuds?
It’s recommended to charge your JLab Go Air Earbuds when the battery level falls below 20%. This will help prolong the battery life of the earbuds. Avoiding deep discharges (i.e., letting the battery completely drain to 0%) can also help extend the lifespan of the battery.
As a general rule, try to charge your earbuds at the same time every day, such as when you’re getting ready for bed. This will help keep the battery level consistent and prevent it from completely draining.
What should I do if my JLab Go Air Earbuds won’t charge?
If your JLab Go Air Earbuds won’t charge, try the following troubleshooting steps: Check the charging cable for damage or debris. Make sure the earbuds are properly aligned with the charging contacts in the case. Try using a different USB power source or charging cable. Reset the earbuds by pressing and holding the button on the charging case for 10 seconds.
If none of these steps resolve the issue, it’s possible that there’s a problem with the charging case or the earbuds themselves. In this case, you may need to contact JLab support for further assistance or to request a replacement.