Are you experiencing connectivity issues or poor sound quality with your Sesh Evo earbuds? Perhaps you’re looking to sell or gift them, and you want to ensure all your personal data is erased. Whatever the reason, performing a factory reset on your Sesh Evo earbuds can be a great way to breathe new life into them. In this article, we’ll take you through the process of factory resetting your Sesh Evo earbuds, and provide some helpful tips and tricks along the way.
Before You Begin: Preparing Your Sesh Evo Earbuds for a Factory Reset
Before you start the factory reset process, there are a few things you should do to prepare your Sesh Evo earbuds.
Charge Your Earbuds
Make sure your Sesh Evo earbuds are fully charged before you begin the factory reset process. This will ensure that you don’t run out of battery power during the reset process.
Disconnect Your Earbuds from Your Device
If your Sesh Evo earbuds are currently connected to a device, such as a smartphone or tablet, you’ll need to disconnect them before you can perform a factory reset. To do this, simply go to the Bluetooth settings on your device and select “Forget device” or “Unpair.”
The Factory Reset Process: A Step-by-Step Guide
Now that you’ve prepared your Sesh Evo earbuds, it’s time to start the factory reset process. Here’s a step-by-step guide to help you through it:
Step 1: Put Your Earbuds in Pairing Mode
To put your Sesh Evo earbuds in pairing mode, press and hold the button on the charging case until the LED light starts flashing. This should take about 10-15 seconds.
Step 2: Open the Skullcandy App
If you have the Skullcandy app installed on your device, open it and select your Sesh Evo earbuds from the list of available devices.
Step 3: Select “Factory Reset”
Once you’ve selected your Sesh Evo earbuds in the Skullcandy app, you should see an option to “Factory reset” them. Select this option to begin the reset process.
Step 4: Confirm the Factory Reset
You’ll be prompted to confirm that you want to perform a factory reset on your Sesh Evo earbuds. Select “Yes” or “Confirm” to continue.
Step 5: Wait for the Reset Process to Complete
The factory reset process should take about 30 seconds to complete. You’ll know it’s finished when the LED light on the charging case stops flashing.
Troubleshooting Common Issues with Sesh Evo Earbuds
If you’re experiencing issues with your Sesh Evo earbuds, a factory reset may not always be the solution. Here are some common issues and their solutions:
Issue: Poor Sound Quality
If you’re experiencing poor sound quality with your Sesh Evo earbuds, there are a few things you can try before performing a factory reset. First, make sure that your earbuds are properly paired with your device. You can do this by going to the Bluetooth settings on your device and selecting your Sesh Evo earbuds from the list of available devices. If you’re still experiencing poor sound quality, try resetting your earbuds or contacting Skullcandy customer support.
Issue: Connectivity Problems
If you’re experiencing connectivity problems with your Sesh Evo earbuds, there are a few things you can try. First, make sure that your earbuds are in pairing mode and that your device is searching for available Bluetooth devices. If you’re still experiencing connectivity problems, try restarting your device or resetting your earbuds.
Conclusion
Factory resetting your Sesh Evo earbuds can be a great way to resolve connectivity issues, poor sound quality, and other problems. By following the steps outlined in this article, you should be able to perform a successful factory reset and get your earbuds working like new again. Remember to always charge your earbuds before performing a factory reset, and to disconnect them from your device beforehand. If you’re still experiencing issues after performing a factory reset, you may want to contact Skullcandy customer support for further assistance.
| Issue | Solution |
|---|---|
| Poor sound quality | Check that earbuds are properly paired with device, reset earbuds, or contact Skullcandy customer support |
| Connectivity problems | Put earbuds in pairing mode, restart device, or reset earbuds |
By following these steps and troubleshooting common issues, you should be able to keep your Sesh Evo earbuds working like new and enjoy great sound quality and connectivity.
What is a factory reset and why do I need to do it on my Sesh Evo Earbuds?
A factory reset is a process that restores your Sesh Evo Earbuds to their original settings, erasing all data and customizations. You may need to perform a factory reset if your earbuds are malfunctioning, experiencing connectivity issues, or if you’re planning to sell or give them away. This process will remove all paired devices, reset the earbuds’ settings, and restore the default configuration.
Before performing a factory reset, make sure to unpair your Sesh Evo Earbuds from all devices and remove them from your device’s Bluetooth list. This will prevent any accidental reconnections during the reset process. Additionally, keep in mind that a factory reset will erase all data, including any custom EQ settings or firmware updates, so you may need to reinstall or reconfigure these settings after the reset.
How do I prepare my Sesh Evo Earbuds for a factory reset?
To prepare your Sesh Evo Earbuds for a factory reset, start by placing them in their charging case. Make sure the case is charged and the earbuds are properly seated. Next, go to your device’s Bluetooth settings and remove the Sesh Evo Earbuds from the list of paired devices. This will prevent any accidental reconnections during the reset process.
Additionally, if you’re using a Skullcandy app or software to customize your earbuds, you may want to uninstall or log out of the app before performing the factory reset. This will ensure that any custom settings or data are removed during the reset process. Once you’ve completed these steps, you’re ready to proceed with the factory reset.
What are the steps to factory reset my Sesh Evo Earbuds?
To factory reset your Sesh Evo Earbuds, start by placing them in their charging case. Next, press and hold the button on the charging case for 10 seconds. Release the button when the LED light on the case starts flashing. Then, press and hold the button again for another 10 seconds. The LED light will flash again, indicating that the factory reset is complete.
Once the factory reset is complete, your Sesh Evo Earbuds will automatically restart. You may need to wait a few minutes for the earbuds to fully reset and restart. After the reset, your earbuds will be restored to their original settings, and you’ll need to pair them with your device again.
How long does it take to factory reset my Sesh Evo Earbuds?
The factory reset process for Sesh Evo Earbuds typically takes around 30 seconds to 1 minute to complete. However, you may need to wait a few minutes for the earbuds to fully reset and restart. During this time, the LED light on the charging case may flash or display a specific pattern, indicating that the reset is in progress.
After the reset, your earbuds will automatically restart, and you may need to wait a few minutes for them to fully boot up. Once the earbuds are restarted, you can pair them with your device again and start using them as normal.
Will I lose my custom settings and data after a factory reset?
Yes, a factory reset will erase all custom settings and data on your Sesh Evo Earbuds, including any custom EQ settings, firmware updates, or paired devices. This means that you’ll need to reinstall or reconfigure these settings after the reset.
However, if you’re using a Skullcandy app or software to customize your earbuds, you may be able to restore some of your custom settings after the reset. Check the app or software documentation for more information on how to restore your settings.
Can I factory reset my Sesh Evo Earbuds without the charging case?
No, you cannot factory reset your Sesh Evo Earbuds without the charging case. The charging case is required to perform a factory reset, as it provides the necessary power and controls to reset the earbuds.
If you’ve lost or misplaced your charging case, you may need to contact Skullcandy support for assistance. They may be able to provide additional guidance or replacement options for your charging case.
What should I do if my Sesh Evo Earbuds don’t work after a factory reset?
If your Sesh Evo Earbuds don’t work after a factory reset, try restarting them again or checking the charging case for any issues. Make sure the earbuds are properly seated in the case and that the case is charged.
If the issue persists, you may want to contact Skullcandy support for further assistance. They can help troubleshoot the issue or provide repair or replacement options for your earbuds. Additionally, you can also try resetting the earbuds again or checking for any firmware updates to ensure that your earbuds are running the latest software.